Hiking in Finland

Climbing, bikepacking, skiing & packrafting in the north

Backcountry Boiler: The Power of MYOG and Community Supported Development

| Comments

Today marks a Premiere on this wee blog, as that the following post is the first Guest Article on this site. I'm a huge fan and supporter of Devin Montgomery, the inventor of the first ultralight backcountry chimney kettle aka "The Backcountry Boiler". It is a fantastic project, and Devin will now set out and take you on a journey, talking about the origin of the Backcountry Boiler, the power of Making-Your-Own-Gear, Community Supported Development and ultralight backpacking.

Me hanging out with the Backcountry Boiler on a recent hike.


The story of the Backcountry Boiler really started in spring 2007. I had just returned from a 128-mile solo row down the entire length of the Monongahela River in southwestern Pennsylvania. Having enjoyed the trip so much, I looked for other ways to spend long days in the outdoors covering a great deal of distance (I was able to make about 20-25 miles per day in the boat). So I naturally turned to backpacking, but remembering the grueling slogs of a heavy pack when I was in Boy Scouts, I looked for a lighter way and came across ultralight backpacking.

In researching the field, I found that the "sacrifices" one had to make - no tent, a minimal sleeping pad, no spare clothes, a simple diet - meant little to me. What did strike me were the benefits - I could cover miles and miles in the beautiful outdoors, feeling more like I was simply taking a pleasant walk than hauling a load from point A to B.

So I took to my gear with scrutiny. One thing that had to go: my heavy MSR Whisperlite stove. Predictably, I turned to alcohol stoves and made my own out of a soda can. It was in researching designs for my stove that I first came across chimney kettles - the Kelly, the Thermette, a slew of others.

They were awesome. An ingenious design that uses almost any available fuel, aspirates combustion through something called the stack effect created by warm air flowing up through the chimney and pulling in new air through the inlet, creates a large surface area for heat transfer, and shields the fire from the wind. Oh, and heck, it could even be used as a canteen to carry water when not in use. Apparently, the perfect wood stove, really the perfect backpacking stove for those who eat a simple ultralight diet, and multi-purpose to boot!

The anatomy of a Chimney Kettle

Existing Products

The problem: the only ones available commercially were dinosaurs. They were ancient - no meaningful design changes had been made in over half a century - and they were big and heavy - the smallest and lightest one commercially available weighed 19 oz and took up around 250 ci of pack space. That's the weight I had budgeted for a three-season quilt, and even the fuel savings couldn't justify it.

I wasn't the only one who loved the idea of a chimney kettle but loathed the size and weight of those currently available. It's my understanding that Backpacking Light's Ryan Jordan even approached one of the existing manufacturers about a lighter version for his Arctic 1000 (before he worked with Bush Buddy on the Ultra), but that it was a no-go. Many of the solutions looked to either exotic, expensive metals like titanium, or ultra-low capacities for the weight savings. Others (including my initial efforts) looked to the use of existing aluminum bottles or cans hacked up and stuck together with high-temperature epoxy. But ultimately, all of these seemed unappealing approaches, and I thought there was just a better, simpler way to make to make a high-quality, smaller, lighter, but still very useful chimney kettle.


So in early 2008, I very literally went back to the drawing board, starting from scratch. With the aid of what was then a relatively new, free CAD program, Google Sketchup, I stripped down the concept of a chimney kettle to its core elements: fuel, air, water. The solution had to be light, small, simple, packable, and it had to boil a reasonable amount of water in a reasonable amount of time. What I came up with had no extraneous parts or details, used simple geometric rules to minimize the amount of material needed for a given volume, and carefully balanced the interior space of the device between that allocated for combustion and that for water. Some of the aspects ended up mirroring existing products, some ended up being entirely new. The finished product was unlike anything else available.

A virtual Backcountry Boiler in the free software in which it was created.

I mocked it up out of aluminum of a thickness I considered durable enough for regular use and I came up with something remarkable: a chimney kettle that weighed 1/3 as much (under 6 oz vs. 19 oz), took up only a bit over 1/3 as much pack space (about 90 ci vs 250 ci) and boiled the same amount of water (20 oz) as the smallest, lightest other chimney kettle available! The only sacrifice was a slight increase in the amount of time it took to boil 2 cups of water. Against quotes of just 3 minutes for 2 cups with the existing product, mine took around 5 because of my intentional shrinking of the combustion chamber. A good compromise given all the benefits, I thought. Now I just had to get it made.

Seeking Manufacturing

As I discovered through my research, if you're looking to have thin-walled, deep aluminum parts made that have relatively low tooling costs and per-piece costs that diminish with scale, you have two options: metal spinning and hydro-forming. So armed with my design, I approached a number of metal spinning and hydro-forming shops around the U.S. But I was unfortunately met with bad news: none of them would provide me a quote to make the Boilers as light as I had designed them to be. The best I could get was something that was around 13-14 oz, and material thicknesses more than twice what I had determined would be mechanically sufficient through my mock-up. This was still 2008, and I was unimpressed enough with such a marginal improvement that I kept on pushing for a better solution.

Back to MYOG

Fortunately, through all of this research, I also came across more information on how metal spinning is performed. Specifically, I came across a PDF from a guy at Stanford that laid out the basics of metal spinning. Even better, I found some DVDs I could rent online, incidentally made by a guy only a few hours away from where I live, that showed how someone could make their own tools and basic parts on a wood lathe. So I rented the DVDs. Bought a lathe, grinder, drill press and some odds and ends from Harbor Freight (a discount tool supplier here in the states) for cheap. Made my own metal spinning tools. Learned how to turn wood for the forms, and tried to spin my parts. 

But the first lathe was junk, so I got a second. The second lathe was much better (actually quite good for a wood lathe), but the parts I was making were larger and more difficult than those I had seen being made, and I needed a proper metal spinning lathe. I found an antique in Arizona, not too far from where one of my sisters lives, and had her (with much appreciation) freight ship it to me. I had some work done on it, wired up a motor to run it, and in June 2009, popped off the first living, breathing Boiler (though it didn't have the name at the time). I've taken that prototype on every hike since and it has performed marvelously.

The evolution of the Backcountry Boiler pre-production.

Community Supported Development

All this time, and in true MYOG fashion, I was sharing my progress with the online community at Backpacking Light. I had come to the site in an effort to lighten my load, but came to find a great deal more. Ultralight backpacking is, in my mind and the minds of many, about a lot more than ounces and grams. It's about being analytical about how we experience the outdoors. When that way of thinking is applied to gear, it only makes sense that it should be light. You do have to carry it after all, and each comfort in camp at night has to earn its passage on you back during the day.

It is because of this analytical approach that Backpacking Light has what I would say is one of the most, if not the most, thriving MYOG communities anywhere. My project and I fit nicely into that community. The gratuitous support I received there is what kept me going on this project despite novice skill, never having a proper workshop, and developing it over the same three years as I happened to be in both law and business schools - two very rigorous programs.

It is there that I first made more of the Boiler (it had acquire the nickname "Montgomery Kettle," which I happily went with for some time) available to others for reservations in spring of 2010. At the time, I had an open summer ahead of me, and I was optimistic about turning out a bunch for my online compatriots. Fortunately for me, but unfortunately for the Boiler, I was then presented with the opportunity for some work on a very exciting, but not related to the outdoors, project I couldn't pass up. I continued work on the Boiler in the time I did have, but perhaps unsurprisingly, found it extremely difficult to mass produce a cutting edge product on my back porch in my spare time.

The entirety of the workshop where the Backcountry Boiler was prototyped.

When school started up again in the fall, I had no real choice but to put the project in the back seat until I graduated in the winter. In the middle of that last hectic semester, the Backpacking Light community found out that one person who had been posing as a customer and seeking a lot of specific details about the Boiler was now shopping around a copy he paid to have made.

Aside from what I've already said, the only thing I really have to say about that is that developing a product in the open has both benefits and costs. There have been scores of people who have found my project interesting and have offered support. One guy found it interesting and decided that he would rather be the one benefitting from it. I wouldn't take away the experience of the former to avoid the exploitation of the latter. I think people still value authenticity in the goods they buy, and I have gotten a lot of support that confirms that belief.

Local, Community Funded Manufacturing

Given that it looked like the world wouldn't wait for me to finish school, and that I certainly didn't have the time to make them all myself in the middle of the semester, I again approached a local spinning shop about having them make the Boiler. Better news came this time and the difference was that I knew what I wanted to have made was possible. I was able to show them my prototype and walk them through the process I used. Having them replicate my efforts took longer than expected, but that speaks to the great things one devoted person can accomplish. Their persistence in following though with the difficult task speaks to the value of creating personal relationships with suppliers, and how local manufacturing lends itself to those kinds of relationships. The production Boiler weighs just a bit more and has just a bit less volume than my prototypes, but the manufacturing is a lot more reliable.

A crew member of a local spinning shop working on the production version of the Boiler.

Now that I could have them made by a commercial shop, I again turned to the community for support. Because I've done this whole project while being a student and living on loans, it has always been done on a shoestring budget. The largest single capital investment that it has required, for instance, was the antique lathe I used for prototyping. In what may have been one of the most effective uses of government dollars, I paid for the lathe with an economic stimulus tax rebate issued by the US government in 2008.

But to pay for a large enough run for the Boilers to be affordable, I was going to have to order quite a large quantity - requiring more capital than I could fork out myself. So I opened up pre-orders to pay for production and response was excellent. I sold over 100 in a week, thanks in large part to efforts of friends of the project who spread the word about it on a slew of forums and blogs. As a thank you to supporters, I offered them at cost, but accepted tips of 10, 20 or 30%. More than half of those who ordered paid more than they had to out of sheer goodwill towards the project. In business lingo, this method of financing is called "crowd funding" and is a powerful tool being used to fund creative projects all over.

Google analytics report for the week pre-orders were open. Note the significant traffic from referring sites, all of which was generated by unsolicited postings by supporters of the project.

The Takeaway

What I take from this experience, what I think is even more interesting than the development of a single product, is that the playing field in outdoor product development is more level than one might think. The Backcountry Boiler lightened and shrunk the state-of-the-art in chimney kettles by about a third, with no significant decrease in capacity or performance. That level of improvement is almost unheard of, and, in my humble estimation, presents a product that has an appeal entirely new from anything that came before it. The route I have taken isn't that heavy in investment capital, but demands a lot in terms of creativity, persistence, and community engagement. But I think it's better for it. This product is just one example of how this recipe can realize innovations in a field that has been fallow for decades. And it's this kind of development to which I would look for the next bit of exciting gear.

The other thing I take away is how very powerful the online communities we build are. The Boiler simply wouldn’t have come about if it weren’t for these communities. They pull in people from all over the world, based around common interests rather than geographic location. They support good ideas and can smell a phony. All I’ve done is be myself and treat those I interact with like real people and I’ve gained a lot as a result.

The Backcountry Boiler: endless hot water anywhere all for about the same size and weight as a wide-mouthed water bottle.

What's Next

Backcountry Boiler as a product and my blog, The Boilerwerks, as a documentation project are here to stay. I'm still trying to figure out a name to incorporate under. The pre-ordered Boilers will be shipped out in a few weeks, and in the same batch are a number that will be available through Backpacking Light (just announced today!). But I'm already planning the next large group buy, which will allow more people to be involved in building this project and should provide some of the capital for me to start keeping an inventory.

There are already two improvements on the Boiler that I'm working on, but that won't be ready in time for the initial shipment. They will, however, be entirely backward compatible with the current Boilers. I don't really believe in planned obsolescence. There is at least one accessory for the Boiler that I plan on thoroughly involving the community in developing. Beyond that, I'm excited about some other concepts in stove design that I've been working on, but they're on hold until the Boiler is properly established. What I can say is that they will use fuels that I believe have been under-utilized, namely not the ubiquitous alcohol.

But again, even more than manufacturing specific products, I'm really interested in exploring the whole process of making and making available innovative outdoor gear. Personally, I want to become more proficient in the use of design software, and learn to work with some new materials. I want to continue engaging the outdoor community in what I do and see what great things we are capable of.


Many, many thanks to Devin for this great article! I enjoyed it a lot, and look now even more forward to receiving my Backcountry Boiler!

New Gear From the Cottages

| Comments

With the Outdoor Retail Show in Utah just over, and the ISPO in Munich in full swing, I'd say we lightweight and UL backpackers should look to the true innovators not attending these shows - the cottage manufacturers who produce since years real ultralight and lightweight gear for our needs. Consider this a current report on new gear from cottages the world around!

The new Katabatic Gear Blackwelder quilt.

Katabatic Gear came out with two new quilts, the Blackwelder 0°F, a serious winter quilt filled with 610 g of down for a total weight of 935 g; and the Alsek 22°F for the warmer summer months months. My me, that looks so cozy warm that I wanna go sleep in it!

enLIGHTened equipment is on a break at the moment, developing new gear. They should be back in business in a while, so don't worry!

The New SMD Skyscape shelter.

Six Moon Designs announced the new Skyscape shelter which will become available this coming spring. Ron is also working on a smaller sized pack which he will announce in a couple of weeks, and the Haven is undergoing a re-design. Finally, with the release of Skyscape, the Vamp will be discontinued. Ron says it's too costly to make and difficult to setup correctly, and that the closeout sale will probably be next month.

Jacks 'R' Better now offer 900 fp down as a filling for all their quilts. All quilts with 900 fp are a tad lighter than before, with the same performance. JRB also brings out three new hex tarps and a new summer quilt, and they will debute at Trail Days in Damascus Virginia the second week of May. Furthermore, in case you missed it, last autumn the worlds flattest hammock, the JRB Bear Mountain Bridge Hammock, got a makeover and now comes with an attached bug net with three sidezippers so that it can be completely rolled back and tied out of the way when not in use.

Fritz from Bushbuddy has been kept busy by making the normal and Ultra BushBuddies, and hasn't had time to work on new projects, though they're still on his mind. So those that want to see a Ti BushBuddy should practice themselves in patience.

Trail Designs has currently a lot to do as their new website created a lot of demand for the products. New gear might appear during the year, so keep an eye on their site.

Gossamer Gear came out with the CubicTwinn Tarp a few weeks ago, the popular SpinnTwinn made even lighter. The Lodge should also make an appearance in the next months on their website, so check "The Week In Review" when the info is out, or keep an eye on the GG website.

AntiGravity Gear has a number of new products in development, and George disclosed that they're working on a new alcohol stove based on their Tin Man BCS2 stove - this should be ready in a couple of weeks so keep an eye on their website if you're in the market for a new stove.

Titanium Goat is cooperating with a few other cottages to offer some interesting new products, such as the Sierra Sniveller Special and Cyanocitta quilts. In-house they continue to make excellent lightweight gear, with the new additions to the family being the Raven Omni bivy, carbon fibre lids and tent poles. Goosefeet, made by Ben Smith, are also available through them. Hmm. Goosefeet. Warm.

Alpinlite Gear has no new products to announce for 2011, but in late 2010 Gen released the Terraform tarp and Bug Shelter 2.0. In a few weeks he will be releasing a small version of the Terraform tarp sized to fit the Bug Shelter 1.25 (so a new product after all =).

Hyperlite Mountain Gear has updated their Windrider packs with wider hip pads and larger hip pad pockets, an increase in volume of the back mesh pockets, a switch to a lighter, stronger aluminum stay, an added hydration sleeve to the inside of the pack, and a new size for a total of 4 sizes, S, M, L and L-tall. HMG also added an ice axe loop and keeper & an additional compression strap to the bottom of the pack. Puh, that's quite an update! Two different packs are in development and will be launched during this spring as well, fleshing out their line. Another interesting development from HMG is a cuben ground cloth which can double as a tarp and a hex cut hammock tarp should also be coming soon. The Echo shelters will get an increase in headroom for the inners, and finally, Hyperlite Mountain Gear will soon offer COLOURS!

Warbonnet Outdoors likes to shred itself in mystery and keeps its cards close to its chest. What Brandon was willing to tell me was that there's a few new products coming out in the months to come. We shall wait and see. Pokerface.

A look out of the new LightHeart Gear Awning Tent.

LightHeart Gear introduced a few weeks ago the Solo Awning Tent, and it isn't yet certain if it will be available with one door or two or have options on these. Still coming is "The Wedge", which will allow existing solo and duo tents to be set up as an awning tent.

Mountain Laurel Designs just announced the 2011 version of the Alpine bivy, now called eVent Soul Bivy and it sports a cuben floor. And in January MLD announced the Cirrus tent, a four to eight person single-wall shelter. Additionally Ron let me know that they will have Cuben LW packs back soon, and a new, lighter series of Cuben fiber tarps and shelters, made from lighter Cuben, the AIR SERIES. They also started makings quilts again and some other gear with the new Momentum 5o, a 10d fabric.

ULA Equipment will have some slight changes in future Circuit and Catalyst packs (see on the ULA Facebook wall) and all other packs stay the same. The Epic now includes a 55 l Drybag and sports an interchangable hipbelt.

Elemental Horizons came out with a new pack, the Aquilo. It is a lightweight frameless pack that weighs about 709 gram and is designed to use your sleeping pad as the support system inside the pack, and it is also compatible with the aluminum stay from the EH internal frame pack, the Northern Lite. They're available in Medium and Large Size with a volume of 42 liter. Matthew also is working on another pack, about which we might hear more in the future!

The LAUFBURSCHE Cuben Laavu.

LAUFBURSCHE from Germany sets the bar high for Laavus & Tipis with his newest creation. At an height of 195 cm, a diameter of 330 cm and a trail weight of 500 gram we have a serious contender for the title of "Lightest Tipi Shelter". The material is cuben, and my Samurai heart skipped a beat as I heard it also will be available in black. You can get various groundsheets and inners for it, suiting any condition. He's also working on expanding his backpack offerings, and, most importantly, hopes to have his Webshop online soonish, to be found under http://www.laufbursche-gear.de/.

Mountainfitter brought out some nifty small pieces of gear which usually are overlooked but are essential for an UL backpacker. Their titanium stake which is called the Ti-eye and is designed to replace the titanium shepards hook; it is currently offered as a 5", 6" and 8" version. Lawson will also soon offer a 6.5" long, 13 gram headless Titanium nail stake called the Ti-spike, made from a piece of 6AL-4V 4.75mm rod which has a hole drilled in it and comes with some of his guywire 100% dyneema cord. Speaking of cord, a 2mm solid braid 100% dyneema cord rated to 850lbs is also new; the solid braid holds knots better which is a real plus with the slippery dyneema. You also might want to take a look at the bear bag system he offers, which is the lightest in the world. Finally, also new is the "Tarmock", a silnylon hammock tarp hybrid weighing in at a mere 369 gram including a stuff sack and two CAMP carabiners, and for which an optional setup kit will be available.

The new HexaNet Solo Bug shelter.

ZPacks also will come out with a bunch of new gear, including waterproof breathable jackets, a non-breathable rain cape to go with their cloud kilts, an inner bug net ("HexaNet") for the Hexamid tarps, a vapor barrier liner quilt, a hammocks and hammock shelters and several miscellaneous accessory projects. All that and some new weights of cuben fiber material and new colors are also coming. On a side note in that matter, ZPacks is working together with TrailLite Designs to make available the cuben CloudKilt and CloudCape, and a cuben UL Ebira tenkara rod carrier.

Locus Gear from Japan also has some new gear coming out. First, we'll see eVent, Pertex and a secret ultra light breathable fabric being used in future creations. Second, Jotaro works on a limited edition of a tipi shaped shelter set which includes a inner mesh and bathtub floor shelter, pole and stakes. A new, green-ish color SilNylon for the Khufu and Khafra series will be coming this spring, making those shelters very stealthy. There's more in the pipeline, so keep your eyes and ears open!

Finally, Henry Shires from Tarptent has been busy working on their office expansion, so product design has been on hold for a while and we likely won't see anything new before the autumn from him. However, a new website including setup videos should be online soon, so you might want to regularly surf to Tarptent to check it out.

I contacted Aarn from Aarn Design, Don from Four Dog Stoves, as well as CRUX and Lightwave if they have any news, but there came no reply.


I hope you enjoyed this run-down of new gear from our beloved cottage manufacturers. In case I missed something, please leave a comment and I will amend the post!

The Week in Review

The original, impeccable "The Week In Review".

News & Various:

I enjoyed Issue 11 of the Backpacking Light Magazine, as there's a article about Skiing in Finland in it, in an area where I will be next week for six days.

You're a young grasshopper and want to collect your first experiences in the outdoors in winter. Don't look for self-proclaimed "experts" which fiddle around in their backyard (the only backyard fiddling I approve of is Shug's!). Learn from folks like Johan, who show you how to light a fire on snow.

Another real expert whom you should listen to is Chris Townsend. David Lintern from Selfpowered interviewed him for a Radio show, here's the rundown with links.

Brian went the extra mile and made the ultimate Cord Weight/ Strength/ Cost Comparison tables.

Trail Blazes is a new Podcast from Compass Points, and in their January edition they talk about winter hiking in Colorado, some winter hiking tips, and what the podcast is all about.

If the name Sage Clegg doesn't yet ring any bells, then you better head over and read this interview with a remarkable triple crowner - she is the first woman to complete the AT, PCT and CDT in less than 18 months!

If TGOC means anything to you, head over to Kenburg's blog and see the great map he made. It gives an overview of where everything is along the TGOC, from bothies to views and pubs!

Karl collected Great Nature Quotes! Me likey.

Simon makes lovely stuff out of wood. Check out his tools if working with wood is something that sounds like a worthy past-time to you.

Richard wrote an excellent post on how to pitch a tarp with paddles. All packrafters, canoe and kayak folks (and people who like to carry paddles) should immediately head over and check out the superb photos.

John played around with Spreadsheets and found out that Heavier is Sometimes Lighter.

Izzy is musing on why we document and share our adventures.

Ultralight bikepacking is a new German blog, and it started off with a MYOG snowpegs article.

Adventure in Progress writes on the one thing every family needs to be successful in the outdoors.

Ausgerüstet compares NiMH, Li-Ion und Alkali batteries used in flashlights.

Vegetarian thru-hiking can be done. Sweet!

Rio wrote a MYOG Guide for a UL sunglass case.

The Velo Hobo has a very important post on towels on his blog, aptly titled "Always Know Where Your Towel Is".

The Backcountry Boiler is Made in Pittsburgh. I think that's really important to know as well.

I wrote this week on my love for the forest, and interviewed Daniel Galhardo from Tenkara USA.


Antti concluded The Alpine Pass Route 2009 movie. Before he sells the rights to Fox Searchlight, view it for free on his blog!

Dave writes a letter in order to packraft the Grand Canyon.

Tomie and Caro went with friends through the Wimbachtal to the Funtensee.

From the European Alps to Hawaii and Kahekili-Kauhi, the crouching Lion.

I enjoyed Around Scotland's Cramond photos.

Also Atom's Utah photos are superb, even more so as there was a freak blizzard covering the red rocks with white powder!

A fine day hike is documented by Barbara, and the Parker Ridge in Banff National Park, Alberta has fine views and funny Mountain Goats.

Bigbananafeet discovered that it's lonely at the top on a weekday in typical Scottish weather.

The Blethering Blonde went for a Weekend Wander, and if you fancy a fine sunset at Ailsa Craig and some wildlife, you might want to take a peek.

Granite & Ice visited Cornucopia. That's some though climbing there.

Creep and fellow Japanese ULers went on a Stealth Snow Hike.

Kenburg hiked Ardgour and Ardnamurchan, lovely photos.

John and Kelley enjoyed a crisp, clear day along Park Loop Road.

Laurent hiked up Mt. Watamuki, great photos of beautiful Japan.

John and Jean go back to the mountains. Wow, what a scenery.

Odinus went camping on the beach. I'd love to do that as well this summer!

This weeks recommended read goes to Fils' mountain bivouc trip with friends. Gorgeous photos of a star-filled night and dawn, you won't be disappointed!

sbrt quit running and blogging and is now actively pursuing a career in music. I'm a loser baby, so why don't you run me? is the first single, out now!

Ellen hiked up Mount Moosilauke in some proper winter-snow-cold-conditions.

Gary and his mate went to Creag Meagaidh and climbed up Easy Gully. Proper winter climbing adventure.

The 2nd recommend read trophy goes to none other than Mr. Roman Dial, Packrafter extraordinaire. Roman visited the Grand Australian Canyon, The Franklin with Bill & Cody, and beautiful photos and videos will make you wanna travel to Tasmania asap.

Grizzly Adam is living in paradise.

Pig Monkey was walking along the wild coast. That is a seriously nice coast, with seriously nice sunsets.

Mark on the other hand was snowshoeing up Buckden Pike. A mysterious man was following him, appearing as a shadow in his photos. I hope Mark is fine.

Dondo is a mysteriously strong man, and I don't know why he became a UL backpacker, as he obviously has no problems carrying massive boulders, as seen on his last trip in the Rampart East Roadless Area.

Gear Addicts confess:

Mungo Is Still Mad About Wool Blankets. I approve of wool blanket madness.

Dave reviews the Marquette Backcountry skis.

Dennis and family reviewed the Mountain House Lasagna with Meat Sauce. Nom nom!

If spoons are your métier, check Alan's MYOG Spoon article and collection.

Hike, Bike, Dale! is soon setting out to hike the AT. Preparations are nearly done, and to get an idea what they're going to eat, have a look at their Dinner production video.

Dental Floss is not only essential for healthy teeth on-and-off trail, but also a useful multipurpose item. Brawny gives you the details.

Thomas takes a peek at the Woolpower Full Zip Jacket 400.

Jill discloses some wisdom on gear for cold-weather running.

Maz gives us the Fells in Winter: Gear Debrief.

Andy reviews a new book from Cicerone, Lightweight Camping by John Traynor.

Jack reviews the Tarptent Moment after using it on the CDT. That's about 2650 miles of testing. That is good.

Mr. Horner reviews the Terra Nova Laser 20L Pack.

terrybnd takes a first look at the Rab Exodus and Rab Drillium pants.

Mr. Newton <3 quilts and got himself a Mountain Laurel Designs Spirit quilt, at which he takes a first look.

An ultra-secret teaser.